Nanshan reports overseas alumina averaging $321/t, down 22% year on year

A third-quarter rebound lifted prices from a weak first half as new smelting capacity raised demand and some refineries curbed output.

Nanshan Aluminium International Holdings has put overseas alumina prices at an average of about USD 321 per tonne for the first nine months of 2026, roughly 22 per cent below the same period a year earlier. The figure comes from an update on the unaudited results of its controlling shareholder, Shandong Nanshan Aluminium Co., Ltd., for the nine months ended 30 September 2026.

Prices held low through the first half of 2026 before turning up in the third quarter. The company linked the improvement to the commissioning of overseas electrolytic aluminium smelters, which raised expected alumina demand, and to production constraints at some alumina refineries.

Those two forces pull in opposite directions: additional smelting capacity adds to consumption, while restricted refinery output tightens availability. Even with the third-quarter recovery, the nine-month average remained about 22 per cent below the January–September 2025 level.

Nanshan noted that the controlling shareholder's unaudited financial and operational results were prepared under Chinese accounting standards and may not be directly comparable with the group's own financial statements, which are drawn up under Hong Kong Financial Reporting Standards.

The company advised shareholders and potential investors to exercise caution when trading its shares and not to place undue reliance on the unaudited information.

It added that the overseas alumina price trend remains an important indicator for the aluminium value chain as shifts in smelting demand and refinery supply continue to steer the market.

IV

Ingrid Vermeulen

Ingrid Vermeulen covers dimensional quality and surface treatment for custom manufactured parts, spanning machined housings, sheet metal enclosures, castings, and molded components. Her editorial work separates drawing requirements from inspected results using ISO 2768-1:1989 general tolerances, ISO 1101:2017 geometric tolerance symbols, measured Ra roughness, CMM reports, ISO 8062-3:2023 casting tolerances, and ASTM A967 passivation guidance only where a drawing or process invokes them. She helps quality engineers, NPI engineers, and sourcing managers define acceptance criteria, review first-article inspection packages, and weigh lead time, traceability, and landed cost.