KraussMaffei Extrusion Develops Single-Stage PVC InlineMixing Process for Roofing Membranes

The continuous route feeds solids and liquids directly into a twin-screw extruder, eliminating a separate hot-cold mixing stage and targeting lower energy and operating costs.

KraussMaffei Extrusion has developed a continuous single-stage process for making PVC roofing membranes, called PVC InlineMixing, that removes the separate hot-cold mixing step used in conventional production. The company says the approach can lower energy and operating costs, shorten production time and support faster return on investment, while allowing formulation and color changes during operation.

In the traditional two-stage route, PVC powder, plasticizers, additives and fillers are processed batchwise in a separate heating-cooling-mixing combination to create a dryblend. After cooling and intermediate storage, that mixture is plasticized in a twin-screw extruder and formed into membranes. PVC InlineMixing instead feeds all solid and liquid components directly into the extruder through gravimetric dosing systems in the required proportions.

Cost and footprint effects

Because the separate mixing combination is no longer needed, manufacturers avoid that capital investment and the material is heated only once. KraussMaffei Extrusion says energy consumption and energy costs can fall by up to 75%, depending on the formulation, system parameters and location. The continuous layout also reduces the space required for the overall system and lowers labor requirements compared with a dry-blend premixing setup.

  • Lower maintenance needs, because wear parts for the heating-cooling mixer are eliminated.
  • Lower capital expenditure from omitting the separate mixing equipment.
  • Lower operating expenditure from reduced energy use, labor and maintenance.

The company says the combination of lower CAPEX and OPEX improves overall cost-effectiveness and creates the conditions for a quick return on investment. No fixed payback period is given; the actual result would depend on the formulation, equipment configuration, energy prices and site conditions.

Flexibility and process control

PVC InlineMixing also changes how recipe changes are handled. Formula adjustments and color changes can be made directly during operation through the integrated control system, according to the company. That removes the need to prepare and store separate dryblend batches before production. Christopher Bartel, head of sales for flat and foam at KraussMaffei Extrusion, says the approach gives membrane manufacturers lower production costs, greater flexibility and more efficient manufacturing, allowing them to react faster to new requirements and adjust formulations during production while reducing energy and capital expenditure.

Validation and industrial reference

The process was developed at the KraussMaffei Extrusion Technology Center in Laatzen and tested with industrial roofing membrane formulations. The trials used a co-rotating twin-screw extruder from the ZE 65 BluePower series, equipped with loss-in-weight feeders for all solid components and multiple liquid feeders for free-flowing ingredients. The ZE BluePower series has a Da/Di ratio of 1.65; the company says the combination of high torque and large free volume provides a wide process window for different formulations.

Tests confirmed what the company describes as excellent gelation of the PVC and high product quality. The mechanical properties and weldability of the membranes also met industrial requirements, according to KraussMaffei Extrusion, and this was validated for several formulations. Bartel says the results show the potential of PVC InlineMixing for industrial roofing membrane production, and that the technology center works with customers to test their formulations under production-relevant conditions, optimize the process and prepare for industrial implementation.

The process is already in use on an industrial production line for PVC roofing membranes. The reference plant achieves a total throughput of 1,800 kg/h with two extruders and two calenders. PVC, additives and fillers, together with edge trimmings generated in the line, are continuously processed directly into finished membranes. KraussMaffei Extrusion presents the development as a way to combine high product quality with a leaner production process, though the reported cost benefits remain dependent on each formulation and installation.

CO

Chidi Okonkwo

Chidi Okonkwo covers factory automation and motion systems, including industrial robot cells, PLC-controlled assembly lines, servo drives, and machine vision inspection stations. His coverage works from measurable parameters such as cycle time, positioning repeatability, payload and reach margins, drive sizing calculations, and safety-related control boundaries rather than unverified throughput claims. He writes for automation engineers, manufacturing engineering directors, and capital procurement managers who must compare cell designs, specify interfaces, and accept a line against quantified commissioning results.