3T-AM shifts metal additive focus from prototypes to repeat production

The Newbury manufacturer is aligning job ownership, in-house machining and printer capacity around serial orders, with production now estimated at about 70% of revenue.

3T Additive Manufacturing is reorienting its Newbury metal AM business around repeat production rather than one-off prototype work. Commercial director Eddie Andrews, who joined in November 2021, said the company knew how to make a single metal component for many customers; the harder task was to win the order again, meet the agreed price and deliver on schedule. He described the goal as making repeatable manufacturing routine and unglamorous.

Production now accounts for around 70% of revenue, Andrews estimates, while new product introduction still takes up roughly 80% of the team’s time. Semiconductor customers generate the strongest demand, followed by energy, then space and defence. Aerospace remains central to plans, but 3T-AM has found work for its machines while it waits for more aerospace programmes to reach suppliers at volume.

From prototype shop to production ownership

3T-AM dates its business to 1997 and recalls its first metal machine arriving around 2008. By the 2021 reset, years of accommodating individual prototype jobs had left a shop floor with process after process. The company narrowed its customer base, gave larger accounts more influence over development and simplified accumulated procedures. Much of the work remained manual while the team established which operations it could reliably repeat.

Changing who owned a job mattered as much as changing equipment. Previously, the first person to see a drawing was the engineer responsible for printing it, so the immediate question was how to print the part. Today a product owner is responsible for delivering the finished component, and print and machining specialists agree on the part’s condition as it passes between operations. 3T-AM also brought machining in-house, giving the SME more control over cost, quality and delivery dates, while larger multi-laser machines improved printing productivity. Andrews said a successful additive manufacturer also needs to be a really good CNC machining company. Repeat orders now give 3T-AM room to choose development jobs, though some will never become production contracts.

SBO backing and capacity

Austrian precision manufacturing group SBO acquired 3T-AM in October 2025. The Newbury business generated around £5 million in sales in 2024. SBO brought experience in machining downhole drilling equipment, including components up to ten metres long, and was interested in 3T-AM’s metal printing expertise and access to a different set of industrial customers.

SBO approved 3T-AM’s five-year business plan and asked whether it could be done quicker. In August 2026, the group reported that 3T-AM had added an EOS M400 in the second quarter, ordered another printer and invested further in post-processing. Those purchases formed part of a seven-printer expansion across UK and US operations.

A full order book makes the next machine easier to justify, but it also leaves little time to qualify a different material or develop a new product. Andrews wants to preserve two distinct reasons to invest: contracted demand and work that 3T-AM cannot yet offer. He recalled a pre-pandemic aerospace enquiry in which a single family of parts would have required 16 multi-laser systems to cover only a share of the requirement. From the buyer’s side, the question was how many suppliers had the floor space, capital and capacity to take it on. Andrews sees this as one reason why original equipment manufacturers still keep sizeable additive programmes in-house.

What customers can measure

For some customers, replacing a casting with a printed part earns its keep through lead time alone. A legacy or development programme can obtain a component sooner, even at much the same unit cost. At higher volumes the calculation becomes tougher. Machine maintenance contracts and consumables weigh on the hourly rate, and a single-shift factory has fewer productive hours over which to spread those costs. Andrews sees scope to learn from CNC shops that operate around the clock. One place he would look for automation is support removal, where the process can still depend on an experienced operator’s knowledge of a particular job.

A project with Honeywell Aerospace will test another claim for additive manufacturing. Under an Aerospace Technology Institute-funded programme, the partners are converting an existing conventionally manufactured component to additive. The sustainability team at the NCC in Bristol is carrying out a 12-month life-cycle assessment covering manufacture, service and end of life. Printing closer to the finished shape should use less feedstock and leave less metal to machine away than starting with billet. The study will compare the two manufacturing routes alongside any benefit the redesigned component delivers in service.

In Newbury, the intended outcome is information a purchasing department could use. As 3T-AM connects its factory and enterprise systems, it is developing digital product passports to document the carbon associated with making an individual component. By the end of 2028, Andrews wants that information to come with every part at no extra charge, giving customers compiling supply-chain emissions reports one more thing to expect from a routine order.

IF

Ines Farkas

Ines Farkas covers cross-family hardware tool specification comparison, tool storage systems, maintenance spares, and total cost of ownership for industrial and workshop buyers. Her work examines measurable inputs such as drawer cycle ratings, load capacity, replacement-part availability, and documented supplier test evidence, and it separates a quoted specification from a verified measurement. She supports MRO buyers, quality engineers, and facilities managers who must compare quotations, plan spare-part coverage, and justify a purchasing decision without relying on unverified supplier rankings.